New Vehicle Tilt Deck Trailer - 2023 PJ Trailers 6'' Channel Super Wide Tilt (TS)

Description

PJ Trailer's (TS) 6'' channel super wide tilt trailer has a stationary front bed with a tilting rear portion. The drive over fenders, wide deck, and hydraulic tilt make this trailer great for hauling vehicles and equipment. The GVWR is 14,000lbs. This trailer is available in sizes ranging from 18' to 24' with a width of 102''. This series comes standard with the features below and has available upgrade options.

Standard Features                   **Pictures above are not specific to an individual trailer**

• 14,000 lb. G.V.W.R. 
• 7,000 lb. x 2 G.A.W.R. 
• 2 5/16” Ball Adjustable Coupler 
• Safety Chains 
• 1 - Drop Leg Jack (10,000 lb.) 
• 2 - Dexter E- Z lube Brake Axles (7,000 lb.) 
• Torsion Suspension 
• 4 - 16” White Spoke Wheels 
• 4 - 235/80R16 Radial Tires (3,520 lb.) 
• Stake Pockets & Rubrail 
• Electric Breakaway Kit w/ Charger 
• Drive Over DP Steel Fenders 
• 11 Degree Tilt Pitch 
• 3” x 16” Cylinder 
• 6” Channel Frame & Tongue 
• 3” Channel Crossmembers 16” on Center 
• 2” Treated Pine Lumber Deck 
• 102” Wide Tiltable Deck 
• 80½” Between Fenders 
• DOT Approved Flushmount Lights 
• All-Weather Wiring Harness (7-way RV) 
• Sand Blasted, Acid Washed, Powder Coated 
• 10 year Dexter Torflex Axle Warranty

Upgrade Options Available

COUPLER OPTIONS

• BP 2 5/16” Adjustable* 
• 3” Pintle Eye - Channel-mount (21,000 lb.) 

AXLE OPTIONS

 7,000# (DEXTER) 

• (2) Electric (Torsion)* 
• (2) Surge Hydraulic Drum [Surge Coupler] (Torsion) 

7,000# W/14 PLY LR-G TIRES (DEXTER) 

• (2) Electric (Torsion) 

TAIL OPTIONS

• 16’ Tilt Deck* 

OTHER OPTIONS

• Blackwood Pro Full Deck 
• Blackwood Pro Outer Deck
• GN Lockable Chain Holder 
• 1 Extra Pair Flushmount D-Rings on Steel Floor 
• 1 Pair D-Rings Fork Rack (18’ and Longer) 
• 1 Hydraulic Monster Jack™ Includes Front Toolbox 
• 2 Hydraulic Monster Jacks™
• Light Bar w/4 Lights 1 Pair Weld-On Strap Ratchets 
• Top Riser Toolbox 
• 1/2 x 1/2 Square Traction Bars on Rear of Deck 
• Plate for Winch 
• 6” Taller GN Riser 
• 9,990 G.V.W.R. 
• Battery Charger 
• Solar Battery Charger 
• 12”oc Crossmembers 
• Rough Oak Floor 
• 2nd Jack (Bumper Pull) 
• Power up Power down Tilt 
• Power Up/Down & Gravity Down 
• Mount Only for Spare Tire 
• 11ga(1/8”)DP Steel Floor w/4 Flushmount D-Rings & 12”oc 
• Front Toolbox (Bumper Pull & Pintle)
• Spare Tire and Mount (Bumper Pull)
• Bulldog 2-speed Jacks (12,000 lb.) 
• Roller on Front of Deck for Winch Cable