New Flatbed/Flat Deck (Heavy Duty) Trailer - 2021 PJ Trailers Tandem Dual Tilt (TD)

Description

PJ Trailer's (TD) Commercial Grade Heavy Duty Deckover gooseneck tilt trailer has a stationary front bed with a tilting rear portion. The TD series are high quality heavy duty tilt trailers that are great for hauling vehicles and equipment. The GVWR is 25,000lbs. This trailer is available in sizes ranging from 24' to 40' with a width of 102''. This series comes standard with the features below and has available upgrade options.

Standard Features                **Pictures above are not specific to an individual trailer**

• 25,000 lb. G.V.W.R. 
• 10,000 lb. x 2 G.A.W.R 
• GN 2 5/16” Ball Bulldog Coupler 25,000 lb 
• Safety Chains 
• 2 - Dropleg Jacks (10,000 lb.) 
• 2 - Dexter Oil Bath Axles (10,000 lb.) 
• Torsion Suspension 
• 8 Dual Wheels, 16” Grey, 8 on 6.5” Bolt Pattern 
• 8 - 16” 235/80R16 Radial Tires (3,090 lb) 
• Rubrail & Stake Pockets 
• Electric Breakaway Kit w/ Charger 
• DOT Reflective Tape 
• Monster Steps on Both Sides 
• Lockable Front Toolbox w/Chain Holder 
• Self-rising Bumper 
• 24’ Tilt Portion w/ 15 Degree Tilt Pitch 
• 12VDC Hydraulic Pump 
• Scissor Lift 
• 12” x 19 lb. I-Beam Main Frame, Riser & Neck 
• 8” x 15 lb. I-lb. Deck Frame 
• 3” Channel Crossmembers 16” on Center 
• 2 x 6 x 1/8” Square Tubing Outer Deck Frame 
• Frame Bridging on 30’ and Longer 
• 2” Treated Pine Lumber Deck 
• 102” Wide Deck 
• DOT Approved Flushmount Lifetime LED Lights 
• All-Weather Wiring Harness (7-way RV) 
• Sand Blasted, Acid Washed, Powder Coated 
• Interstate (TM) Deep Cycle Battery 
• 110V Integrated Trickle Charger 
• 5” x 17” Hyd. Cylinder w/Scissor Lift 
• 10 year Dexter Torflex Axle Warranty

Upgrade Options Available

COUPLER OPTIONS 

• GN 2 5/16” Round (25,000 lb.) w/ Toolbox* 
• BP 2 5/16” Adj Rigid Mount (25,000 lb.) w/Tbx 
• GN 2 5/16” Round (30,000 lb.) w/ 6” Longer Tube 
• GN 2 5/16” Round (30,000 lb.) w/ Toolbox 
• 3” Pintle Eye - Face-mount (36,000 lb.) w/Tbx 
• GN 2 5/16” Square (30,000 lb.) w/ Toolbox 
• GN 2 5/16” Square (25,000 lb.) w/ Toolbox 

AXLE OPTIONS 

10,000# W/235/75R17.5” LR-J SINGLE T&W (DEXTER) 

• (2) Electric (Spring) 
• (2) Electric (Torsion) 
• (2) Elec/Hyd Disc (1,600 PSI Pump) (Spring) 

10,000# AXLES (DEXTER) 

• (2) Electric (Air Ride) 
• (2) Electric (Spring) 
• (2) Electric (Torsion)* 
• (2) Elec/Hyd Disc (1,600 PSI Pump) (Air Ride) 
• (2) Elec/Hyd Disc (1,600 PSI Pump) (Spring) 

10,000# W/14 PLY LR-G DUAL T&W(DEXTER) 

• (2) Electric (Spring) 
• (2) Electric (Torsion) 

12,000# AXLES (DEXTER) 

• (2) Electric (Spring) 
• (2) Elec/Hyd Disc (1,600 PSI Pump) (Air Ride) 
• (2) Elec/Hyd Disc (1,600 PSI Pump) (Spring) 
  

12,000# W/14 PLY LR-G DUAL T&W (DEXTER) 

• (2) Electric (Spring) 
• (2) Elec/Hyd Disc (1,600 PSI Pump) (Spring) 

TAIL OPTIONS

•  24’ Tilt Deck 

OTHER OPTIONS

• Blackwood Pro Full Deck 
• Blackwood Pro Outer Deck 
• 1 Extra Pair Flushmount D-Rings on Steel Floor 
• 1 Pair D-Rings 
• HD 25k Jost 2x Jacks 
• 2 Hydraulic Monster Jacks™ 
• Light Bar w/4 Lights 
• 1 Pair Weld-On Strap Ratchets 
• 1 Side-mount Toolbox 45”x17½” 
• 1 Side-mount Toolbox 72”x17½” 
• Solar Battery Charger 
• Top Riser Toolbox 
• 1/2 x 1/2 Square Traction Bars on Rear of Deck 
• Hutch susp. H9700-Underslung Tandem Axle 
• Plate for Winch 
• 6” Taller GN Riser 
• Under Frame Tie Down Flat 
• 22 lb. I-Beam Main Frame, Riser & Neck 
• 12”oc Crossmembers 
• Rough Oak Floor 
• 11ga (1/8”) DP Steel Floor w/ 4 D-Rings & 12”oc 
• Frame Bridging 
• Bulldog 2-speed Jacks (12,000 lb.) 
• Roller on Front of Deck for Winch Cable

Send Email